Desa 2-Level Manual do Utilizador descarregar pdf

Twin Halogen

Motion Sensing

Light with 2-Level

Lighting

Model 5512

Features

• Turns on lighting when motion is detected.

• Automatically turns lighting off.

• 2-Level Lighting Timer.

• Photocell keeps the lighting off during daylight

hours.

• LED indicates motion was sensed (day or night).

Requirements

• The Light Control requires 120-volts AC.

• If you want to use Manual Mode, the control must be

wired through a switch.

• Some codes require installation by a qualiﬁ ed

electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet

locations.

Cover

Plate

Light Control

Sensor

3 Wire

Connectors

Gasket

6 Mounting

Screws (3 sizes)

Mounting Bolt

Mounting Strap

Rubber Plug

OPERATION

* resets to Auto Mode at dawn.

TEST

TEST 1 5 20

ON-TIME

Off 3 6 Dusk to

Dawn

2-Level

Lighting

Put ON-TIME switch

on the sensor bot-

tom to TEST and

the 2-Level Lighting

switch OFF.

MANUAL MODE

ON-TIME

TEST 1 5 20

... back on.

AUTO

1 Second OFF

then...

2-LEVEL LIGHTING TIMER

Light comes on half bright for selected time after dusk

(Off, 3 hr., 6 hr., until dawn). If motion is sensed, the

light turns on full bright for the ON-TIME (1, 5, or 20

minutes) then returns to dim mode.

Move ON-TIME Switch to

1, 5, or 20 minutes

Mode Switching Summary

Flip light switch

off for one second

then back on*

MANUAL MODE

AUTO

TEST

Note: When ﬁ rst turned on wait about 1

minutes for

the circuitry to calibrate.

Manual mode only works at night

because daylight returns the sensor

to AUTO.

Flip the light switch off for one second

then back on to toggle between AUTO

and MANUAL MODE.

Manual mode works only with the

ON-TIME switch in the 1, 5, or 20

position.

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-

bration time the control will be in the AUTO mode.

Light Shield

Plastic Hanger

2 Halogen Bulbs

This package includes:

Put the ON-TIME switch in the 1, 5,

or 20 minute position.

Mode: On-Time: Works: Day Night

Test 5 Sec x x

Auto 1, 5, 20 min. x

Manual Until Dawn* x

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Lighting

Página 2 - INSTALLATION

2598-1275-00INSTALLATIONFor easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the ﬁ xt

Página 3 - TEST AND ADJUSTMENT

3598-1275-00SPECIFICATIONSRange . . . . . . . . . . . . . . Up to 70 ft. (21 m); 100 ft.(30.5 m) with Range Boost. [varies with surrounding te

Página 4 - TECHNICAL SERVICE

4598-1275-00POSSIBLE CAUSE1. A lamp is positioned too close to the sensor or pointed at nearby objects that cause heat to trigger the sensor. (Reposi

Página 5 - FUNCIONAMIENTO

5598-1275-00Modelo 5512Características• Prende la luz cuando detecta movimiento.• Apaga la luz automáticamente.• Temporizador del alumbrado de 2 ni

Página 6 - INSTALACION

6598-1275-00Para una fácil instalación escoja una luz con un interruptor de pared.Para un mejor funcionamiento, instale el aparato a casi 2,4 m del su

Página 7 - ESPECIFICACIONES

7598-1275-00PRUEBA Y AJUSTE❒ Prenda el cortacircuitos y el interruptor de luz. Lo menos sensible Lo más sensibleDetectorMovimientoEl detector es men

Página 8 - SERVICIO TÉCNICO

8598-1275-00POSIBLE CAUSA1. Un faro está colocado demasiado cerca al detector o apunta a objetos cercanos que hacen que el calor active el detector.